Nordictrack treadmill viewpoint 2800 manual

EXP 14i just dropped and is ready to ship! Get all the benefits of interactive, world-wide training at a price that fits your budget. FREE Shipping. Commercial Commercial Treadmill. Powered by. New Commercial New For NEW Commercial Shop Now. Commercial X32i Incline Treadmill. Commercial X22i. Next Page. Nordic track user's manual treadmill ntl Save this manual for future reference.

Page 3: Important Precautions 2. Use the treadmill only as described. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. Page 4 Do not change the incline of the treadmill by placing objects under the treadmill. When folding or moving the treadmill, make sure that the frame is held securely by the pin on the latch knob.

If a decal is missing or illegible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. The C treadmill offers an impres- sive selection of features designed to make your work- outs at home more enjoyable and effective. Page 7: Assembly This is a normal condition and does not affect treadmill performance.

If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Page 8 2. Note: One replacement Base Pad may be included. Use the Base Pad to replace any Base Pad that becomes worn. Page 9 Next, insert the pin into the Latch Insert, and tighten the knob back onto the pin. Hold the cylinder end of the Shock near the bracket in the center of the crossbar on the Frame Page 10 9.

Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking belt see page To protect the floor or carpet from damage, place a mat under the treadmill. Page 11 Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame.

Note: No antenna, cable, or adapter is included. Page 12 If you purchase the optional chest pulse sensor see page 31 , follow the steps below to install the re- ceiver included with the chest pulse sensor. Make sure that the power cord is unplugged. Page Operation And Adjustment Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpect- edly, which may result in a fall and serious injury.

Page 14 Walk programs, four Jog programs, and four Run programs. Each program automatically con- trols the speed and incline of the treadmill as it guides you through an effective workout. You can even create Custom programs and save them for future use. Incline at max height we held the stop speed up buttons till two beeps then pressed the incline button it lowered then raised back to max and stopped we then pressed the speed button and belt went to max speed, hit speed button again belt came to a stop we then pressed the stop button and removed the key.

It just keeps repeating this process. Can you offer some suggestions? We never see the screen you speak of in step two. EP:2P Our screen flashes with the following: version 1. It reads incline sensor 0 after reaching max incline. Then we press the speed up to read 85 and it reads out After this i look at the board and the light is on solid.